Tone Man Guitar prebuilt wiring kits will improve your guitars overall tone. Your sound will be stronger, tighter with improved clarity. Notes will open up with greater sustain. Tone and Volume controls are very responsive and smoother. By rolling back your volume some you can clean up an over driven amp. One of my favorite things is the elimination of much of the treble loss when you roll the volume down. All kits are carefully custom hand wired to order. Only the best quality parts are used including vintage Gavitt cloth push back wire just like they used back in the 50’s and 60’s. You will not find a better a better product or selection.
Our Classic Telecaster Kit uses Orange Drop tone cap for an improved over all tone. All wired 50's style with premium new components that perform better than the stock electronics found in today's guitars. You will hear and feel the difference. Our most economical upgrade wiring kit.
This kit is for:
Telecaster models with 3 way blade switch with single volume and tone controls. Including Squire, American, Standard, and MIM Telecasters.
What's In The Tele Kit:
Humbucker pickup pot value option:
If your Telecaster has 2 humbucker pickups 500K pots are recommended. We will substitute 500K for 250K. Just add a note when purchasing that you prefer 500K pots.
Note: If you have an imported guitar (e.g. Japan, China, etc.) you may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns bushings.
Although these harnesses are pre-assembled and tested they do require some soldering to connect the pick ups and output jack. A 25 – 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation.
Each harness is custom built after purchase so my lead time to build your harness before shipping is 5 to 10 business days. In stock means I have the parts to build. You will receive a notice with USPS tracking number once shipped.
About Tone Man Guitar: I have been playing the guitar for over 50+ years. My passion has always been about the Tone. I have tried many different types of caps, pots and wiring over the years. I am a one man shop and do all the work myself. I have a great passion for providing only the best parts and workmanship. I appreciate you visiting my site and I look forward to helping you with your Tone or any other type of guitar modifications.
I believe in good communication. If you have questions please feel free to send me an email. I will respond as quickly as I can. Same goes when you receive your parts. I want you to be satisfied!
Cheers,
Gary Standerfer
Tone Man Guitar
Our Classic Telecaster Kit uses Orange Drop tone cap for an improved over all tone. All wired 50's style with premium new components that perform better than the stock electronics found in today's guitars. You will hear and feel the difference. Our most economical upgrade wiring kit.
This kit is for:
Telecaster models with 3 way blade switch with single volume and tone controls. Including Squire, American, Standard, and MIM Telecasters.
What's In The Tele Kit:
- Bourns Pro Audio 250K potentiometers, Short-Split-Shaft, Audio Taper with dress washer and 2 nuts
- Sleeve adapters to convert split shaft to solid pot shaft if needed
- 3 way switch (tip not included) - Oak Grigsby
- Orange Drop Tone Capacitor - your choice of tone cap value .022uf or .047uf
- Switchcraft ¼ inch Output jack
- 50’s style cloth Gavitt Vintage push back 22awg wiring
- Assembly Template Hard Board All assembled except for final hook up of ¼ inch output jack & pickup connections
- Complete with 50's wiring diagram and easy to read step by step installation instructions
- Every kit goes thru our Performance and Accuracy Testing before being shipped out. Our kits work.
Humbucker pickup pot value option:
If your Telecaster has 2 humbucker pickups 500K pots are recommended. We will substitute 500K for 250K. Just add a note when purchasing that you prefer 500K pots.
- Cavity width min 1- 1/8 inch (pot case are 15/16 inch)
- Cavity depth min 1- 5/8 inch (switch depth that sets down in cavity 1- 1/2 inch)
Note: If you have an imported guitar (e.g. Japan, China, etc.) you may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns bushings.
Although these harnesses are pre-assembled and tested they do require some soldering to connect the pick ups and output jack. A 25 – 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation.
Each harness is custom built after purchase so my lead time to build your harness before shipping is 5 to 10 business days. In stock means I have the parts to build. You will receive a notice with USPS tracking number once shipped.
About Tone Man Guitar: I have been playing the guitar for over 50+ years. My passion has always been about the Tone. I have tried many different types of caps, pots and wiring over the years. I am a one man shop and do all the work myself. I have a great passion for providing only the best parts and workmanship. I appreciate you visiting my site and I look forward to helping you with your Tone or any other type of guitar modifications.
I believe in good communication. If you have questions please feel free to send me an email. I will respond as quickly as I can. Same goes when you receive your parts. I want you to be satisfied!
Cheers,
Gary Standerfer
Tone Man Guitar
