- Store
- >
- PREWIRED UPGRADE KITS
- >
- Telecaster Fender / Squier
- >
- Vintage Fender Nashville Telecaster 3 PU Prewired 5 Way Switch Wiring Kit PIO .047 Tone Cap
Vintage Fender Nashville Telecaster 3 PU Prewired 5 Way Switch Wiring Kit PIO .047 Tone Cap
SKU:
$89.00
$89.00
Unavailable
per item
Free USA Shipping
This kit is for Fender Telecaster Guitar with 3 Pickups
Tone Man Guitar prewired kits will improve your guitars performance. Notes will open up. Sound will be stronger, tighter with improved clarity. Tone / volume controls are very responsive and smoother. Kits are carefully custom hand wired to order using the best quality parts with vintage cloth push back wire like they used back in the 50s and early 60s. You will not find a better product.
Our Vintage Nashville Telecaster Kit with aged PIO Paper In Oil tone cap for an improved vintage tone. All wired 50's style with premium new components that perform better than the stock electronics found in today's guitars. You will hear and feel the difference.
This kit is for:
Nashville Telecaster models with 3 pickups, blade type switch, single volume and tone controls. Including Squire, American, Standard, and MIM Telecasters.
What's In The Vintage Nashville Telecaster Kit:
Pot Value Option:
We give you the option of using 500K pots if you prefer. Just select 500K pot option above when purchased. We will use 500K pots.
Component cut out cavity min depth and width required to fit full size pots and switch;
Although these harnesses are pre-assembled and tested they do require some soldering to connect the pick ups and output jack. A 25 – 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation.
Each harness is custom built after purchase so my lead time to build your harness before shipping is 5 to 10 business days. In stock means I have the parts to build. You will receive a notice with USPS tracking number once shipped.
About Tone Man Guitar: I have been playing the guitar for over 50+ years. My passion has always been about the Tone. I have tried many different types of caps, pots and wiring over the years. I am a one man shop and do all the work myself. I have a great passion for providing only the best parts and workmanship. I appreciate you visiting my site and I look forward to helping you with your Tone or any other type of guitar modifications.
I believe in good communication. If you have questions please feel free to send me an email. I will respond as quickly as I can. Same goes when you receive your parts. I want you to be satisfied!
Cheers,
Gary Standerfer
Tone Man Guitar
Our Vintage Nashville Telecaster Kit with aged PIO Paper In Oil tone cap for an improved vintage tone. All wired 50's style with premium new components that perform better than the stock electronics found in today's guitars. You will hear and feel the difference.
This kit is for:
Nashville Telecaster models with 3 pickups, blade type switch, single volume and tone controls. Including Squire, American, Standard, and MIM Telecasters.
What's In The Vintage Nashville Telecaster Kit:
- Bourns Pro Audio Series 250K potentiometers, Short-Split-Shaft, Audio Taper
- Sleeve adapters to convert split shaft to solid pot shaft if needed
- 5 way switch (tip not included) - Oak Grigsby
- Vintage NOS Paper-In-Oil .047uf K42Y-2 Aged Tone Capacitor
- Switchcraft ¼ inch Output jack
- 50’s style cloth Gavitt Vintage push back 22awg wiring
- Assembly Template Hard Board All assembled except for final hook up of ¼ inch output jack & pickup connections
- Complete with 50's wiring diagram and easy to read step by step installation instructions
- Every kit goes thru our Performance and Accuracy Testing before being shipped out. Our kits work.
Pot Value Option:
We give you the option of using 500K pots if you prefer. Just select 500K pot option above when purchased. We will use 500K pots.
Component cut out cavity min depth and width required to fit full size pots and switch;
- Cavity width min 1 1/8 inch (pot case are 15/16 inch)
- Cavity depth min 1 1/2 inch (switch depth that sets down in cavity 1 3/8 inch)
Although these harnesses are pre-assembled and tested they do require some soldering to connect the pick ups and output jack. A 25 – 40 watt soldering iron is recommended. Make sure you are comfortable with making these connections or we suggest you take this to a qualified guitar tech to complete the installation.
Each harness is custom built after purchase so my lead time to build your harness before shipping is 5 to 10 business days. In stock means I have the parts to build. You will receive a notice with USPS tracking number once shipped.
About Tone Man Guitar: I have been playing the guitar for over 50+ years. My passion has always been about the Tone. I have tried many different types of caps, pots and wiring over the years. I am a one man shop and do all the work myself. I have a great passion for providing only the best parts and workmanship. I appreciate you visiting my site and I look forward to helping you with your Tone or any other type of guitar modifications.
I believe in good communication. If you have questions please feel free to send me an email. I will respond as quickly as I can. Same goes when you receive your parts. I want you to be satisfied!
Cheers,
Gary Standerfer
Tone Man Guitar