Welcome To Tone Man Guitar
Tone Man Guitar DIY 50's wiring kits will improve your guitars overall tone. Your sound will be stronger, tighter and improved clarity. Notes will open up with greater sustain. Tone and Volume controls are very responsive and smoother. By rolling back your volume some you can clean up an over driven amp. One of my favorite things is the elimination of much of the treble loss when you roll the volume down. Only the best quality parts are used. You will not find a better a better product or selection.
This Kit Is For:
USA Gibson Les Paul manufactured from 1977 to present using long shaft pots . Premium new components that perform better than the stock electronics found in today’s guitars. You will hear and feel the difference and love your new tone.
What's In The Classic Kit:
I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 teeth coarse spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit.
**If you are not sure whether your guitar uses short (3/8") or long (3/4") shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul's, all Epiphone's, SG's use short shafts. Most USA made Gibson Les Paul's manufactured after 1977 use long shaft pots. This kit has long shaft pots. We also carry this with short shaft pots. Fender Stratocaster or copies of Strats use short shaft. If you have questions feel free to email me.
Note: If you have an imported guitar (e.g. Japan, China, etc.) you may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns bushings.
Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50's and 60's guitars is what I try to achieve. I am a one man shop and do all the work my self. I guarantee the best parts and workmanship. I believe in good communication. If you have any questions or need help with your guitar project please send me an email. We Want You To Be 100% Satisfied!
Cheers,
Gary Standerfer
Tone Man Guitar
Tone Man Guitar DIY 50's wiring kits will improve your guitars overall tone. Your sound will be stronger, tighter and improved clarity. Notes will open up with greater sustain. Tone and Volume controls are very responsive and smoother. By rolling back your volume some you can clean up an over driven amp. One of my favorite things is the elimination of much of the treble loss when you roll the volume down. Only the best quality parts are used. You will not find a better a better product or selection.
This Kit Is For:
USA Gibson Les Paul manufactured from 1977 to present using long shaft pots . Premium new components that perform better than the stock electronics found in today’s guitars. You will hear and feel the difference and love your new tone.
What's In The Classic Kit:
- 4 – Bourns Pro Audio 500K Potentiometers 15% Tolerance - Long-Split-Shaft, Audio Taper
- 1 – Switchcraft 3-Way Short - Straight Toggle Switch - Black Tip
- 1 - 3" Shrink Tubing
- 2 - Orange drop caps .022uf bridge .022uf neck. Smaller physical size for better fit
- 1 – Switchcraft ¼ inch Output Jack
- 1 – 4.5 ft Gavitt Vintage Braided Shielded 22awg wire for switch wiring / Gavitt black cloth 22awg pot connection ground wire
- 1 - 50's wiring diagram
I personally prefer Bourns potentiometers over all other brands including CTS. I have found them to be smoother, responsive and longer lasting. The very best taper available. These pots are 18 teeth coarse spline shaft so USA type knobs will not fit without first pinching the top of the split shaft together a little and slowly push the knob on. Epiphone and off shore type will fit fine. We do offer a line of knobs that fit.
**If you are not sure whether your guitar uses short (3/8") or long (3/4") shaft pots please check before ordering. Normally Pre-1977 Gibson Les Paul's, all Epiphone's, SG's use short shafts. Most USA made Gibson Les Paul's manufactured after 1977 use long shaft pots. This kit has long shaft pots. We also carry this with short shaft pots. Fender Stratocaster or copies of Strats use short shaft. If you have questions feel free to email me.
Note: If you have an imported guitar (e.g. Japan, China, etc.) you may need to modify the potentiometer holes to 3/8 inch to accommodate the Bourns bushings.
Tone Man Guitar started from my own passion for music, knowledge of electronics and 50+ years of love for the guitar. The great tone from the 50's and 60's guitars is what I try to achieve. I am a one man shop and do all the work my self. I guarantee the best parts and workmanship. I believe in good communication. If you have any questions or need help with your guitar project please send me an email. We Want You To Be 100% Satisfied!
Cheers,
Gary Standerfer
Tone Man Guitar
